How to troubleshoot no sound from one speaker on Insignia LCD TV?
If there is no output from one of the speakers on your Insignia LCD TV, adjust the audio balance. Also, make sure that the audio cables are connected correctly and securely to your TV.
Why does my Insignia LCD TV have no picture and sound?
If your Insignia LCD TV has no picture and no sound, try the following: - Press on the TV or the remote control. - Ensure the power cord is plugged in. - Verify video cables are securely connected to your TV. - Select the correct video input source. - Try another channel to rule out station issues. - Ensure the incoming signal is compatible. - Check that your antenna or cable TV is correctly and securely connected. - Adjust the contrast and brightness. - Ensure the Audio Only option is set to Off. - Check the closed caption settings, as some TEXT modes can block the screen.
Why is my Insignia LCD TV remote not working?
If your Insignia LCD TV remote control isn't working, ensure the power cord is correctly connected to the TV and a power outlet. Also, make sure there are no obstructions between the remote and the sensor on the front of the TV, and point the remote directly at the sensor. Check that the batteries are installed correctly (after removing any plastic wrapping) and replace them if necessary.
How to fix sound on Insignia NS-32E740A12 LCD TV?
If your Insignia LCD TV has good picture but no sound, first, increase the volume and make sure that the sound is not muted. Disconnect any headphones that may be plugged in. Ensure the correct audio mode is selected and that the audio cables are connected correctly and securely. Check that the antenna or cable TV is connected correctly and securely and that the digital channel signal is not low (if using an antenna). Finally, the audio cables you are using may be faulty, so try a new set.
Why is the picture dark on my Insignia NS-32E740A12 LCD TV but the sound is fine?
If your Insignia LCD TV has a dark, poor, or no picture (but the screen is lit) while the sound is good, try switching to another channel to rule out station-specific problems. Ensure that the antenna or cable TV is connected correctly and securely. Adjust the brightness and make sure that the correct picture mode is selected. If you are using an antenna, the digital channel signal may be low, so consider adjusting the antenna or using a highly directional outdoor antenna or set-top antenna with a built-in amplifier. Also, ensure that the video cables are connected securely and try a new set of video cables, as the ones you are using may be bad.
How to adjust color on Insignia LCD TV?
If your Insignia LCD TV shows no color, a dark picture, or incorrect colors, try changing the channel to rule out station issues. Adjust the color settings and ensure that the video cables and the antenna or cable TV are connected correctly and securely. If you are using an antenna, the digital channel signal may be low, so consider adjusting the antenna or using a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
How to prevent after images on Insignia NS-32E740A12?
To prevent after images on your Insignia LCD TV, avoid displaying a still image, such as a logo, game, or computer image, for an extended period. This can cause a permanent after-image to be burned into the screen, which is not covered by your warranty.
How to eliminate audio noise from Insignia LCD TV?
If you are experiencing audio noise with your Insignia LCD TV, other devices may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference and move it further from the TV.
How to improve poor picture quality on Insignia NS-32E740A12 LCD TV?
If your Insignia LCD TV has a poor picture, ensure that the room is not too bright, as light reflecting off the screen can make the picture difficult to see. If an S-VHS camera or camcorder is connected while another device is turned on, the picture may be poor, so try turning off one or more devices.
How to fix poor color on Insignia NS-32E740A12 with good sound?
If your Insignia LCD TV has good sound but poor color, adjust the contrast, color, and brightness settings to improve the picture quality.
General| Response time | 9 ms |
|---|---|
| Display diagonal | 31 \ |
| Display brightness | 350 cd/m² |
| Display resolution | 1366 x 768 pixels |
| Native aspect ratio | 16:9 |
| Supported video modes | 1080p |
| Contrast ratio (dynamic) | 5000:1 |
| Contrast ratio (typical) | 1200:1 |
| Supported graphics resolutions | 1366 x 768 |
| 3D | No |
| Backlight | - |
| HDMI ports quantity | 3 |
| DVI-D ports quantity | 1 |
| DVI-I ports quantity | 2 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | 0 |
| Product color | Black |
| Panel mounting interface | 200 x 100 mm |
| RMS rated power | - W |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 64 W |
| Remote control type | Standard |
Weight and Dimensions| Height (with stand) | 533.4000 mm |
|---|---|
| Weight (with stand) | 9888.3137 g |
| Depth (without stand) | 203.2000 mm |
| Width (without stand) | 736.6000 mm |
| Height (without stand) | 457.2000 mm |
| Weight (without stand) | 8164.6627 g |
To Next Page