roducts.com
Getting Started NS-32E859A11/NS-42E859A11
We changed the following graphic based on Dana’s
comments. Vendor wants move HDMI1 up to the first item
in the list and highlight it. Then move Component to just
above VGA. Please advise if additional changes need to be
made.
12 Press SELECT to select OK and exit the remote control
setup.
Programming the button lock
You can use the button lock to assign the power and volume
controls to the device you select, regardless of the operating
mode. For example, if you lock the volume to your DVD player,
then go to TV mode and press a volume button on your
remote, the volume will change on the DVD player instead of
on your TV.
To program the button lock:
1 Press TiVo. The Home screen opens. Press ! or " to select
Settings, then press
$ or SELECT.
2 Press ! or " to highlight Settings, then press $ or SELECT.
10:00pm
Step 5: Select Input
Component [Component]
HDMI 1 [HDMI 1]
HDMI 2 [HDMI 2]
HDMI 3 [HDMI 3]
HDMI 4 [HDMI 4]
VGA [VGA]
I don’t want to automatically switch inputs
If the DVD (or other device) is connected to one of the inputs of this TV,
the TV will automatically change to that input when you press the DVD
button on the remote control.
Remote Control Setup (DVD button)
10:00 PM
Setup Complete!
OK
Remote Control Setup (DVD button)
The DVD button on your remote is now successfully set up to control the
DVD (or other device) connected to HDMI 1 [HDMI 1] on this TV.
Note
Before you program the button lock, you need to
program the mode buttons. For more information,
see “Programming the mode buttons” on page 27.
10:00pm
Home
Settings
Connect to the Internet
Settings
Parental Controls
Check for updates
Account & system info
Help
Sleep timer
To Next Page
Loading...
Need help?
General