What to do if Insignia NS-32L120A13 does not operate normally?
If your Insignia LCD TV does not operate normally by following the operating instructions, unplug it from the power outlet and refer servicing to qualified service personnel.
Why is my Insignia NS-32L120A13 screen dark but the sound is good?
If your Insignia LCD TV has a dark, poor, or no picture but the sound is good, here are some troubleshooting steps: * Try switching to another channel to rule out station-specific issues. * Ensure that the antenna or cable TV is securely connected. * Adjust the brightness settings. * Select the correct picture mode. * If using an antenna, check the digital channel signal strength. If it's low, adjust the antenna or use a directional antenna with an amplifier. * Make sure the video cables are securely connected. * Try using a new set of video cables, as the current ones may be faulty.
Why does my Insignia NS-32L120A13 LCD TV have good picture but no sound?
If your Insignia LCD TV has good picture but no sound, here's what you can check: * Increase the volume. * Make sure the TV isn't muted. * Disconnect any headphones, as they disable TV speakers. * Select the correct audio mode. * Ensure audio cables are securely connected. * Verify the antenna or cable TV connection is secure. * If using an antenna, check the digital channel signal strength. * Try a new set of audio cables in case the current ones are faulty.
What to do if Insignia LCD TV power cord is damaged?
If the power supply cord or plug of your Insignia LCD TV is damaged or frayed, unplug the TV from the power outlet and refer servicing to qualified service personnel.
What to do if Insignia LCD TV has been exposed to rain or water?
If your Insignia LCD TV has been exposed to rain or water, unplug it from the power outlet and refer servicing to qualified service personnel.
What to do if liquid spilled into Insignia LCD TV?
If liquid has been spilled or objects have fallen into your Insignia LCD TV, unplug the TV from the power outlet and refer servicing to qualified service personnel.
What to do if Insignia LCD TV has been dropped or damaged?
If your Insignia LCD TV has been dropped or damaged in any way, unplug it from the power outlet and refer servicing to qualified service personnel.
What to do if my Insignia NS-32L120A13 LCD TV exhibits a distinct change in performance?
If your Insignia LCD TV exhibits a distinct change in performance, unplug it from the power outlet and refer servicing to qualified service personnel.
What to do if my Insignia LCD TV says 'No Signal'?
If your Insignia LCD TV displays a 'No Signal' error message, try the following: * Press the INPUT button to select the correct input for your device or service. * If using a cable or satellite box, use its remote to change channels. * Ensure the correct input is selected for viewing channels from your cable or satellite box.
How to fix Insignia NS-32L120A13 LCD TV remote control not working?
If your Insignia LCD TV remote isn't working, try these steps: * Ensure the TV's power cord is properly connected to both the TV and a working power outlet. * Make sure there are no obstructions between the remote and the TV's sensor. * Point the remote directly at the sensor on the TV. * Remove any plastic wrapping from the batteries. * Verify the batteries are correctly installed. * Replace old batteries with new ones.
General| Screen Size | 32 inches |
|---|---|
| Display Type | LCD |
| Resolution | 1366 x 768 |
| Refresh Rate | 60 Hz |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Aspect Ratio | 16:9 |
| Inputs | HDMI, USB, Composite |
To Next Page