Insignia NS-39D310NA15 User Manual

29
NS-39D310NA15 Insignia 39" LED TV
www.insigniaproducts.com
Using DVI (same as HDMI but requires an audio connection)
1 Make sure that your TV’s power cord is unplugged and the computer is turned off.
2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the computer.
3 Connect the other end of the cable to one of the HDMI jacks on the side of your TV.
4 Connect a 3.5mm audio cable (not provided) to the PC AUDIO IN jack on the back of your TV and to the AUDIO
OUT (headphone) jack on the computer.
5 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
S or T to highlight HDMI1 or HDMI2, then press ENTER.
8 Adjust the display properties on the computer, if necessary.
Note
When you connect the audio using the PC AUDIO IN jack, the audio output
is analog.
HDMI cable
connector
3.5mm audio
cable
connector
HDMI jack PC AUDIO IN
jack
On your TV
HDMI cable with
HDMI-DVI adapter
3.5mm audio cable
Side of TV
Back of TV

Insignia NS-39D310NA15 Specifications

General

Screen Size	39 inches
Display Type	LED
Refresh Rate	60Hz
HDMI Ports	3
USB Ports	1
Backlight Type	Direct LED
Smart TV	No
Built-in Wi-Fi	No
Resolution	720p (HD)
Audio Output	10W x 2
Inputs	HDMI, USB, Composite, RF