46
Insignia 39" LED TV
www.insigniaproducts.com
Displaying a list of INlink-compatible devices
You can display a list of HDMI CEC devices that are
connected to your TV.
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight SETTINGS, then press
T or ENTER. The SETTINGS menu opens.
3 Press
S or T to highlight INlink, then press
ENTER. The SETTINGS · INLINK menu opens.
4 Press
S or T to highlight INlink Device Lists,
then press ENTER. A list of the HDMI
CEC-compatible devices you have connected
appears.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Waking INlink-compatible devices
When a connected INlink-compatible device is
turned off (in standby mode), Connect wakes (turns
on) the device.
When a connected INlink-compatible device is
turned on and you switch to a different video input
source (such as TV), Connect switches to the
device.
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight SETTINGS, then press
T or ENTER. The SETTINGS menu opens.
3 Press
S or T to highlight INlink, then press
ENTER. The SETTINGS · INLINK menu opens.
4 Press
S or T to highlight Connect, then press
ENTER. A list of HDMI CEC-compatible devices
you have connected opens.
5 Press
S or T to highlight the device you want to
connect to, then press ENTER.
6 Press
S or T to highlight a setting, then press
ENTER. You can select:
• Connect—Wake (turn on) the device if it is in
standby mode or returns to the device if you
have switched to a different video input mode.
• Root Menu—Open the device’s root menu,
then use your TV’s remote control to control
the device, if the device has this feature.
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.
To Next Page
Loading...
