21
Insignia 42" LED-LCD HDTV, 1080p
www.insigniaproducts.com
Connecting a home theater system with
multiple devices
The connections you make depend on the video
and audio jacks available on your devices. Refer to
the documentation that came with your devices for
connection information.
Just remember to use the best connection types
available for the best picture and sound. For
information about connection types, see “What
connection should I use?” on page 11.
Using the remote control
Installing remote control batteries
NS-RC-02A-12
To install the remote control batteries:
1 Remove the battery cover.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
3 Replace the battery cover.
Note
When connecting with an AV receiver with ARC
function, we recommend that you connect the
AV receiver’s HDMI OUT jack to your TV’s
HDMI2 (ARC) jack by using an HDMI-ARC compliant
cable.
In the following situations, the HDMI cable routes
Dolby Digital audio to the AV receiver, so you do not
need to connect a separate digital audio cable:
• Have a game console connected to your TV’s
HDMI 1 or HDMI 3 jacks.
• When you watch a program through an antenna
or cable TV connected to the ANT/CABLE jack.
Blu-ray player/DVD player/VCR Cable or satellite TV box
AV receiver
Game console or camera
USB flash drive
Computer
Antenna or cable TV
connected directly to
the wall jack
Cautions
• Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
