5
Insignia 42" LED-LCD HDTV, 1080p
www.insigniaproducts.com
Installing the stand or
wall-mount bracket
Installing the stand
To install the stand:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Secure the stand to the screen with the four
provided screws.
Installing a wall-mount bracket
To attach your TV to a wall-mount bracket:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Remove the four screws that secure the cover,
then remove the cover.
3 Secure the flat stand cover to the back of your
TV using the four screws you just removed.
Notes
If you plan to wall-mount your TV, do not install the
stand.
Store the stand and stand screws in case you decide
to use the stand in the future.
Model Screw type Screw length
NS-42E760A12 M6 type 12 mm
Warning
This apparatus is intended to be supported by a UL
Listed wall mount bracket with a suitable
weight/load rating. (See “Miscellaneous“ on page 53.)
Note
The length of the wall-mount screws vary depending
on the wall-mount bracket you purchased. See the
instructions that came with the wall-mount bracket
for screw lengths.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
