16
NS-BC1ZSS9
www.insigniaproducts.com
Connecting to power
• Plug the cooler into a dedicated, properly installed grounded wall outlet. This
appliance should be operated on a separate electrical circuit from other
operating appliances.
• Plug in and run your cooler for three to four hours before making any
temperature adjustments and before adding beverages. This allows your
cooler to reach a stable temperature.
• Do not use an extension cord with this cooler. If the power cord is too short,
have a qualified electrician install an outlet near the cooler. Use of an
extension cord can negatively affect the cooler’s performance.
• Do not connect your cooler to an electronic energy-saving plug and converter
that converts DC into AC (such as a solar energy system).
CAUTION: This unit is not designed to be installed in an RV or used with an
inverter.
Notes:
• Check your local power source. This cooler requires a 115V, 60 Hz power
supply.
• Use a receptacle that accepts the grounding prong. The power cord is
equipped with a 3-prong (grounding) plug which plugs into a standard
3-prong (grounding) wall outlet to minimize the possibility of electric shock
hazard from this cooler.
• To prolong the service life of the compressor, wait for at least five minutes
before restarting the cooler after a power failure.
To Next Page
Loading...
Need help?
General
