9
165-Can Beverage Cooler
www.insigniaproducts.com
Installing the handle
1 Align the handle with the two bolts on the glass door.
2 Secure the handle with the 3 mm hex wrench (included), making sure that the
screw holes on the handle are facing downward.
Reversing the door
To reverse the door you will need a Phillips screwdriver. Have someone available
to assist you in the process. Make sure that you keep all of the parts you remove to
reuse them later.
1 Make sure that your beverage cooler is unplugged and empty.
CAUTION: Do not lay the beverage cooler completely flat as that could damage
the coolant system.
Handle
Hex wrench
Screw hole facing downward
To Next Page
Loading...
Need help?
General
