20
NS-BC1ZSS9
www.insigniaproducts.com
Moving your beverage cooler
1 Turn off the cooler and unplug it from the wall outlet.
2 Remove all beverages.
3 Securely tape down all loose items inside your cooler.
4 Tape the door shut.
Tips on saving energy
• Locate your cooler in the coolest area of the room, away from heat-producing
appliances or heating ducts, and out of direct sunlight.
• Do not overload the cooler. It forces the compressor to run longer.
• Do not open the door too often, especially if the weather is very hot. Close the
door as soon as possible to prevent cool air from escaping.
• Make sure that the door seals completely to keep your cooler running
efficiently.
• Make sure that the appliance is sufficiently ventilated, with adequate air
circulation behind it.
Troubleshooting
Error codes
If a fault is detected, the display shows one of the following codes:
If any of these error codes appears on the display, contact your local dealer or
service center. Do not try to repair the cooler yourself.
Note: Make sure that the cooler stays in the upright position while transporting.
ERROR CODE DESCRIPTION
E1 Chamber temperature sensor fault
E4 Defrosting temperature sensor fault
E6 Communication fault
E9 High temperature alarm
To Next Page
Loading...
Need help?
General
