EasyManuals Logo

Insignia NS-BC2ZSS8 User Manual

Insignia NS-BC2ZSS8
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
NS-BC2ZSS8
www.insigniaproducts.com
Do not use an extension cord with this cooler. If the power cord is too
short, have a qualified electrician install an outlet near the cooler. Use of
an extension cord can negatively affect the coolers performance.
Using your wine and beverage center
Turning on your cooler
Press the button to turn your cooler on. The display screen and
indicators blink for three seconds and an audible beep will be heard, then
the compressor starts working.
You can manually set your unit to “Standby” mode by touching the
button for approximately three seconds, provided that no other setting is
in effect (the display is not blinking). Repeating this action restarts the
unit.
Setting the temperature
Under normal conditions, the temperature always shows the set
temperature. When adjusting the temperature, the temperature display
blinks to indicate that the temperature is being adjusted.
The temperature in the left and right zones can be set independently by
using the control panel located in each zone. The temperature range of
both zones can be set between 37° F to 64° F (3° C to 18° C) ± 5° F (± 3° C).
When the or buttons are pressed, the temperature will increase or
decrease in increments of one degree. If the or buttons are pressed
and held for two seconds, the temperature will increase or decrease at a
speed of one degree per half second.
After you have adjusted the left and/or right zone to the temperature you
want, release the button. The temperature display will blink for
approximately three seconds to confirm the selected temperature. After
the display stops blinking, the temperature display will indicate the set
temperature of that zone.
Changing the temperature display
The temperature display can be exchanged between Celsius and
Fahrenheit by simultaneously pressing and holding the buttons for
approximately three seconds.
Notes
A large number of bottles will lower the cooling efficiency
of the cooler.
Adjust the thermostat setting by one increment at a time.
Allow several hours for the temperature to stabilize
between adjustments.
NS-BC2ZSS8_17-0590_MAN_V1_ENG.fm Page 10 Friday, July 28, 2017 8:34 AM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Insignia NS-BC2ZSS8 and is the answer not in the manual?

Insignia NS-BC2ZSS8 Specifications

General IconGeneral
BrandInsignia
ModelNS-BC2ZSS8
CategoryKitchen Appliances
LanguageEnglish

Related product manuals