EasyManuals Logo

Insignia NS-DPF10WW-17 User Manual

Insignia NS-DPF10WW-17
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
20
NS-DPF10WW-17
www.insigniaproducts.com
2 Press , , , to highlight Calendar, then press ENTER to display the
calendar and clock.
3 Press BACK repeatedly to leave the OSD menus and return to Photo
Display Mode.
Maintaining your digital photo frame
Cleaning your digital photo frame
Clean the outer surface of the digital photo frame with a clean, microfiber
cleaning cloth.
Replacing the remote control battery
1 Squeeze the battery trays sides together and slide it out of the remote control.
2 Remove the old battery and insert the new 3V lithium battery (CR2025) into
the battery tray. Match the polarity of the new battery with the plus sign (+) in
the battery tray.
3 Slide the battery tray into the battery compartment until it clicks into place.
Note: To change the date and time settings, see “Using the Calendar Setup
menu” on page14.
Cautions:
The battery should not be exposed to excessive heat, such as sunshine, heat
registers, or fire.
Battery chemicals can cause a rash. If the battery leaks, clean the battery
compartment with a cloth. If chemicals touch your skin, wash immediately.
Make sure that the battery is disposed of correctly. Do not burn or incinerate.
Notes:
Remove the battery when the charge is depleted.
If the remote control is not going to be used for an extended period of time, remove
the battery.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Insignia NS-DPF10WW-17 and is the answer not in the manual?

Insignia NS-DPF10WW-17 Specifications

General IconGeneral
BrandInsignia
ModelNS-DPF10WW-17
CategoryDigital Photo Frame
LanguageEnglish

Related product manuals