10
9” Dual-Screen Portable DVD Players
www.insigniaproducts.com
Setting up your player
Connecting to AC power
1 Plug one end of the AC adapter into the DC IN jack on the side of your player,
then plug the other end into an AC outlet.
2 Turn on the DVD player.
ANGLE Select to change the display angle. This option works only if the DVD has multiple
display angles available.
Note
The AC adapter is used to disconnect this device from AC power.
It should not be obstructed OR should be easily accessible during
use. To completely disconnect the power, unplug the AC adapter
from the AC power outlet.
Cautions
• The AC adapter included with this player is for its use
only. Do not use it with other equipment.
• When the player is not going to be used for an extended
period of time, disconnect the AC adapter from the wall
outlet.
• When the AC adapter is plugged in, the player is not
completely disconnected from power, even when the
power is turned off.
Menu option Description
NS-DS9PDVD15_14-0610_MAN_V1_ENG.fm Page 10 Thursday, September 25, 2014 3:35 PM
To Next Page
Loading...
Need help?
General
