Insignia NS-HWMC1848 - Adjusting the Tilt

24
3-in-1 TV STAND
www.insigniaproducts.com
Step 6 : Adjusting the tilt
The TV brackets (P) allow you to make a tilt adjustment of up to 11° down and 5° up to provide optimum viewing
and minimize glare.
1 Loosen the tension knobs on both TV brackets (P), then grasp the edge of the TV and move it up or down to the
position you want.
2 Turn the tension knob clockwise to secure the brackets in position. Use the the 4.76 mm hex wrench (Z) to
tighten the tension knobs, if necessary.
-5° ~ 11°
Turn clockwise to tighten
Turn counterclockwise to loosen
You’ll need:
(Z)
NS-HWMC1848_17-0157_MAN_V4_ENG.fm Page 24 Tuesday, March 7, 2017 3:08 PM