Insignia NS-HWMC1848 - Tools Needed

3
3-in-1 TV STAND
www.insigniaproducts.com
Tools needed:
Phillips screwdriver
Level
Power drill
Hammer
Edge-to-edge stud finder
Pencil
3/8” drill bit (for tipping
restraint)
3/16” wood drill bit
or
7/16” masonry drill bit
1/2” Socket wrench
NS-HWMC1848_17-0157_MAN_V4_ENG.fm Page 3 Tuesday, March 7, 2017 3:08 PM