Insignia NS-HWMC1848 - SWIVEL STAND ASSEMBLY INSTRUCTIONS

26
3-in-1 TV STAND
www.insigniaproducts.com
SWIVEL STAND ASSEMBLY INSTRUCTIONS
Step 1: Align and attach the long rear support
• Insert four 2¼" bolts (V), with lock washers (W) and the flat washers (X), through the drilled holes in the long rear
support (C), then securely screw them into the threaded holes of the side frames (A and B) with the 4 mm hex key
(EE).
NOTE: Make sure that the sockets for the cable clips face backward.
Sockets for
cable clips
face
backward.
You’ll need:
V (4)
W (4)
X (4)
EE (1)
NS-HWMC1848_17-0157_MAN_V4_ENG.fm Page 26 Tuesday, March 7, 2017 3:08 PM