Insignia NS-HWMC1848 - Attaching the TV to the mounting frame on the swivel bracket

30
3-in-1 TV STAND
www.insigniaproducts.com
Step 5 : Attaching the TV to the mounting frame on the swivel bracket
1 Attach the TV brackets (P) to the back of the television following the steps on pages 18, 19, and 20, depending
on the type of TV that you own.
2 Lift the TV up to the mounting frame (N).
3 Set the hooks on TV brackets (P) over the mounting frame (N), then lower the hooks onto the bars of the
mounting frame.
4 Center the TV, then secure it in place using a screwdriver to tighten the safety bolt on the bottom hooks. Tighten
until the safety bolt hits the underside of the mounting frame.
You’ll need:
Phillips screwdriver
NS-HWMC1848_17-0157_MAN_V4_ENG.fm Page 30 Tuesday, March 7, 2017 3:08 PM