10
NS-OTR16SS8Q
www.insigniaproducts.com
Installing your microwave
Step 1: Find the wall studs
1 Using an edge-to-edge stud finder, locate the edges of the wall stud(s) within the opening.
2 Mark the center of each stud, and then draw a vertical line down the center of each stud.
Warning
Your microwave must be connected to at least one wall stud.
Warning
The center of any adjacent wall studs should be 16" or 24" from this mark.
You’ll need:
Wall
stud
Center of the
wall stud
Pencil
Ruler or tape measure
Edge-to-edge stud finder
NS-OTR16SS8Q_17-0283_IST-MAN_V1.fm Page 10 Friday, July 7, 2017 4:20 PM
To Next Page
Loading...
