21
1.6 Cu. Ft. Over-the-Range Microwave
www.insigniaproducts.com
Step 9: Option A - Connecting ductwork
1 Open the cabinet and slide the exhaust adapter front-to-back or side-to-side to adjust.
2 Extend the house duct down to connect to the exhaust adapter.
3 Seal the exhaust duct joints with duct tape.
4 You’re finished! Skip to “Before using your microwave” on page 40.
You’ll need:
Blower plate
Exhuast adapter
Damper
Back of microwave
NS-OTR16SS8Q_17-0283_IST-MAN_V1.fm Page 21 Friday, July 7, 2017 4:20 PM
To Next Page
Loading...
