Insignia NS-OTR16SS8Q - Page 20

20
NS-OTR16SS8Q
www.insigniaproducts.com
4 While holding the microwave up against the wall and cabinet fully tighen the outer two screws.
5 Fit the two grease filters into the openings underneath your microwave.
You’ll need:
BOTTOM
Nylon grommet
(for metal cabinets)
Self-aligning machine
screws
Grease filters
Phillips screwdrivers
NS-OTR16SS8Q_17-0283_IST-MAN_V1.fm Page 20 Friday, July 7, 2017 4:20 PM