17
1.6 Cu. Ft. Over-the-Range Microwave
www.insigniaproducts.com
11 If you have recessed cabinets:
• Make two filler blocks out of scrap wood pieces the size of shaded areas G and H. They must be as thick as
the depth of the cabinet recess.
• Drill 5/8" holes in the filler blocks to align with points D and E.
• Align the blocks with the corresponding holes in the cabinet. They should be at the same level as the
bottom edge of the cabinet frame.
You’ll need:
Electric drill with 1/2” and 5/8”
bits
Duct tape
Scissors
(recessed cabinets only)
Safety goggles
Saw
(saber, hole, or keyhole)
Ruler or tape measure
Filler blocks or scrap wood pieces
(for recessed cabinets only)
Top Cabinet Template
NS-OTR16SS8Q_17-0283_IST-MAN_V1.fm Page 17 Friday, July 7, 2017 4:20 PM
To Next Page
Loading...
