26
NS-OTR16SS8Q
www.insigniaproducts.com
10 If you have recessed cabinets:
• Make two filler blocks out of scrap wood pieces the size of shaded areas G and H. They must be as thick as
the depth of the cabinet recess.
• Drill 5/8" holes in the filler blocks to align with points D and E.
• Align the blocks with the corresponding holes in the cabinet. They should be at the same level as the
bottom edge of the cabinet frame.
You’ll need:
Top Cabinet Template
Electric drill with 1/2” and 5/8”
bits
Duct tape
Scissors
(recessed cabinets only)
Safety goggles
Saw
(saber, hole, or keyhole)
Ruler or tape measure
Filler blocks or scrap wood pieces
(for recessed cabinets only)
NS-OTR16SS8Q_17-0283_IST-MAN_V1.fm Page 26 Friday, July 7, 2017 4:20 PM
To Next Page
Loading...
