37
1.6 Cu. Ft. Over-the-Range Microwave
www.insigniaproducts.com
4 Place the blower unit back into the opening. The blower unit exhaust openings should match the exhaust
openings toward the front of the microwave.
5 Secure the blower unit in the microwave with the remaining screws you previously removed.
.
Note
Make sure that the damper hinge is at the top and that it can swing freely.
You’ll need:
Fan blade openings facing the
front
Back of microwave
Remove blower plate and
adapter screws and save
Remove blower motor screws
and save
Remove blower plate and
adapter screw and save
NS-OTR16SS8Q_17-0283_IST-MAN_V1.fm Page 37 Friday, July 7, 2017 4:20 PM
To Next Page
Loading...
