12
Insignia NS-PDVD10 10.2" Personal DVD Player
www.insignia-products.com
2 To use the remote control, point it at the remote sensor of the
player. (Operate in the range of 16 feet (5 meters) and 60°.)
Installing the battery pack
The battery must be charged and correctly installed before using it.
To attach the battery pack:
1 Turn the player off.
2 Unplug the AC adapter.
3 Turn the player upside down.
4 Insert the battery pack’s catches into the corresponding holes in
the player, then press the battery pack down until it clicks into
place.
To charge the battery pack:
1 Turn the player off. The battery pack charges only when the power
is turned OFF.
2 Attach the battery pack to the player.
3 Connect the AC adapter to the player.
Tip
Generally, batteries last for about one year. Replace the
batteries if the remote control does not work.
Remove the batteries if the remote control will not be used
for an extended period of time.
To Next Page
Loading...
Need help?
General
