www.insigniaproducts.com
7
NS-RBM92BK9/NS-RBM92WH9
Exterior
Setting up your refrigerator
Before using your refrigerator
• Remove the interior packing.
• Let your refrigerator stand upright for approximately four hours before connecting it to power. This reduces the
possibility of a malfunction in the cooling system from incorrect handling during transportation.
• Wash the inside with a damp warm cloth soaked in a solution of one quart of lukewarm water to two tablespoons of
baking soda. See Cleaning your refrigerator on page 15.
• Wait for approximately four hours after moving your refrigerator or plugging it in for the first time so that the coolant
fluid settles.
• For correct operation, you should level your refrigerator using the leveling feet. If you do not level your refrigerator, the
doors may not close or seal correctly, causing cooling, frost, and moisture problems. Turn the leveling feet clockwise to
raise or counterclockwise to lower a side. The leveling feet are easier to adjust if you have someone push against the
top of your refrigerator to take some weight off.
• When moving your refrigerator, do not tilt it beyond 45° from upright.
• Before storing foods in your refrigerator, turn on both the refrigerator and freezer compartments and wait for 24 hours,
to make sure that they are working correctly and to allow both compartments to reach the correct temperatures.
Leveling feet
Refrigerator door
Freezer door
To Next Page
Loading...
Need help?
General
