Insignia NS-WBRDVD2 - Player Operation; Playing Discs; Playback Controls

7
Wireless Blu-ray Disc Player
www.insigniaproducts.com
• Manual—Lets you manually configure
network settings, such as IP address, subnet
mask, and gateway settings. Press or
to navigate to each field, then enter the
appropriate IP information.
6 Press or to select Apply, then press
ENTER. A Network Test automatically runs.
7 If the connection is established, select OK, then
press ENTER to close the screen.
8 Press to go to the previous menu.
To make changes to your network connection,
see “Changing the Network settings” on page
19.
Using your player
Playing a Blu-ray Disc or DVD
To play a Blu-ray Disc or DVD:
1 Press .
2 Turn on the TV, then select the input setting on
the TV that matches the connection method
you used to connect your player.
3 Press to open the disc tray.
4 Place a disc on the disc tray with the label facing
up, then press to close the disc tray. It may
take a few seconds for the disc to load.
5 If a Blu-ray Disc or DVD menu opens, press
or to select PLAY, then press ENTER.
6 To eject the disc, press .
Controlling Blu-ray Disc or DVD playback
To control Blu-ray Disc or DVD playback:
• Press (play/pause) to start or pause playback.
The sound is muted when your player is in pause
mode. To resume normal playback, press
(play/pause).
• Press (stop) to stop playback, press
(play/pause) to start playback again. Depending
on the disc, playback starts where it stopped or at
the beginning of the disc. If you press (stop)
twice, playback stops completely and playback
starts at the beginning of the disc when you
resume playback.
• Press to fast-forward. Each time you press this
button, the fast-forward speed changes in the
following sequence: Fastx2, x4, x8, x16, x32,
x 64, x 128. Press (play/pause) to resume
normal playback.
• Press to fast-reverse. Each time you press this
button, the fast-reverse speed changes in the
following sequence: Fastx2, x4,x8, x16, x32,
x64, x128. Press (play/pause) to resume
normal playback.
• Press to go to the previous chapter within two
seconds after the current chapter starts. To go to
the beginning of the chapter, press any time
after the first two seconds of the chapter have
been played.
• Press to go to the next chapter.
• Press (step) to play one frame at a time. Each
time you press this button, the video advances
one frame. Press (play/pause) to resume
normal playback.
Please enter new IP Address
Valid range of each segment is 0 to 255
Current value 111.11.11.11
New Value
OK Cancel
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
Note
If appears on the screen, the current action is not
permitted by the disc or your player. For example,
many discs do not let you fast-forward through the
warning information at the beginning of the disc.
NS-WBRDVD2-WBRDVD2-CA_10-0865_MAN_V5.book Page 7 Monday, October 24, 2011 10:28 PM