Insignia NS-WBRDVD2 - System Settings Management; Automatic Disc Playback Configuration; Auto Power Down Configuration

17
Wireless Blu-ray Disc Player
www.insigniaproducts.com
6 Press or to select On or Off, then press
ENTER. If you select On, you can change the
other parental control options. If you select Off,
you cannot change the other parental control
options.
7 Press to go to the previous menu.
Setting the parental control level
To set the parental control level:
1 Press or to select Settings, then press
ENTER. The Settings menu opens.
2 Press or to select Parental, then press
ENTER. The Parental menu opens. If the parental
control option is set to On, input the password.
3 If the Parental Control option is set to Off, set
the option to On.
4 Press or to select Parental Level, then press
ENTER.
5 Press or to select the rating level you want
to block, then press ENTER. That rating and all
higher ratings will be blocked. You can select:
• 1[Kid Safe]—Suitable for all children.
• 2[G]—General audiences.
• 3[PG]—Parental guidance suggested.
• 4[PG-13]—Not suitable for anyone under 13.
• 5[PG-R]—Parental guidance recommended.
• 6[R]—Not suitable for anyone under 17 unless
supervised by a parent or adult guardian.
• 7[NC-17]—Not suitable for anyone under 17.
• 8[Adult]—All DVDs can be played.
6 Press to go to the previous menu.
Changing the System settings
Setting automatic disc playback mode
To set automatic disc playback mode:
1 Press or to select Settings, then press
ENTER. The Settings menu opens.
2 Press or to select System, then press
ENTER. The System menu opens.
3 Press or to select Optical Disc Autoplay,
then press ENTER.
4 Press or to Enable or Disable, then press
ENTER. When Enable is selected and you insert
a Blu-ray Disc, playback begins automatically.
When Disable is selected, playback does not
begin automatically. Select the disc from the
Settings menu to begin playing it.
5 Press to go to the previous menu.
Setting the screen saver activation time
Your player has a screen saver feature that turns the
screen black when your player is inactive. You can
set the amount of time you want your player to wait
before activating the screen saver.
To set the screen saver activation time:
1 Press or to select Settings, then press
ENTER. The Settings menu opens.
2 Press or to select System, then press
ENTER. The System menu opens.
3 Press or to select Screen Saver Duration,
then press ENTER.
4 Press or to select Off, 5 Minutes, 10
Minutes, 20 Minutes, or 30 Minutes, then
press ENTER.
5 Press to go to the previous menu.
Setting Auto Power Down
Auto Power Down automatically turns the player off
if no settings are changed after a selected period of
time (5, 10, 20, or 30 minutes).
To set the Auto Power Down time:
1 Press or to select Settings, then press
ENTER. The Settings menu opens.
2 Press or to select System, then press
ENTER. The System menu opens.
3 Press or to select Auto Power Down, then
press ENTER.
Note
These ratings are for DVDs or Blu-ray Discs only.
Enable
Enable
Enable
NS-WBRDVD2-WBRDVD2-CA_10-0865_MAN_V5.book Page 17 Monday, October 24, 2011 10:28 PM