10
NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player
www.insigniaproducts.com
2 Press or to select Pictures, then press
ENTER. The Picture menu opens.
• Select Start Slide Show to view the pictures in
the current folder one by one.
• Select Settings to set the slide show effects
and slide show delay time.
• Select Main Menu to return to the Main menu.
• To view a single file, select the files from the
right panel, then press ENTER.
• Select Previous folder menu to return to the
previous folder.
To play audio or video files:
1 Press or to select Music or Videos, then
press ENTER. A menu opens.
2 Press or to select Play Files, then press
ENTER. The files in the current folder will be
played.
• If you are playing music files and want to view
JPG picture files at the same time, press
RETURN, then press or to select Browse
Pictures, then press ENTER. Select the JPG
files you want to view.
• If you want to see information about the file
that is playing, press or to select Now
Playing, then press ENTER. The following
display appears.
Playing an audio CD
To play an audio CD:
1 Press .
2 Press to open the disc tray.
3 Place a CD on the disc tray with the label facing
up, then press to close the disc tray. It may
take a few seconds for the CD to load.
4 To eject the CD, press .
Controlling audio CD playback
To control audio CD playback:
• Press (play/pause) to start or pause playback.
The sound is muted when your player is in pause
mode. To resume normal playback, press
(play/pause).
• Press (stop) to stop playback completely. Press
(play/pause) to start playback again. Playback
starts at the beginning of the CD.
• Press to fast-forward. Press (play/pause) to
resume normal playback.
• Press to fast reverse. Press (play/pause) to
resume normal playback.
• Press to go to the previous track. Press to
go to the next track.
• Press SEARCH to select a track, enter the track
number immediately with the number buttons,
then press ENTER.
Or,
Enter the track number by pressing the
appropriate number buttons.
Searching for a title, chapter, or elapsed time
To search for a title, chapter, or elapsed time:
1 During playback, press SEARCH one or more
times to select a search mode.
• One press selects Goto Title - - - mode.
• Two presses selects Goto Chapter - - - mode.
• Three presses selects Goto Time --: -- : --
mode.
2 Press the number buttons to enter the title
number, chapter number, or time, then press
ENTER. Your player goes to the title, chapter, or
time you entered.
Repeating a title, chapter, or CD track
To repeat a title, chapter, or CD track:
• To repeat a title or chapter, press REPEAT one or
more times to select a repeat mode. You can
select Off, Repeat Title, Repeat Chapter, Repeat
track, Repeat all, or Random.
Creating a playback loop on a DVD or
audio CD
To create a playback loop:
1 Play the disc until you reach the point where
you want the loop to start, then press A-B.
Random play indicator
Repeat indicator
Play indicator
File 1/5 song1.mp3
Title: Cool Track
Artist: Ricardo Funiccio
Album: Dead Dux
0:02:00
0:30:00 O O
Play
Note
Blu-ray Discs do not normally support playback
loops.
NS-WBRDVD2-WBRDVD2-CA_10-0865_MAN_V5.book Page 10 Monday, October 24, 2011 10:28 PM
To Next Page
Loading...
