Insignia NS-WBRDVD2 - Connecting to External Devices; Connecting TV via Component;A;V; Connecting Audio Systems; Home Network Setup

5
Wireless Blu-ray Disc Player
www.insigniaproducts.com
Connecting a TV using a component video
cable (better)
To connect a TV using component cables:
1 Connect a component video cable to the
COMPONENT VIDEO jacks on the back of your
player and to the COMPONENT VIDEO IN jacks
on the TV.
2 Connect an audio cable to the AUDIO L/R jacks
on the back of your player and to the AUDIO IN
L/R jacks on the TV.
Connecting a TV using an A/V cable (good)
To connect a TV using an AV cable:
• Connect an A/V cable to the VIDEO and
AUDIO L/R jacks on the back of your player
and to the VIDEO IN and AUDIO IN L/R jack
on the TV. Jacks and cable connectors are
usually color-coded. Make sure that you match
the colors.
Connecting audio to an amplifier or home
theater system
To connect audio to an analog amplifier:
• Connect an audio cable to the AUDIO L/R jacks
on the back of your player and to the AUDIO IN
L/R jacks on the receiver.
To connect audio to a digital amplifier or home
theater system:
• Connect a digital optical cable from the OPTICAL
DIGITAL OUT jack on the back of your player to
the OPTICAL DIGITAL IN jack on the receiver.
- Or -
Connect a digital coaxial cable from the COAXIAL
DIGITAL OUT jack on the back of your player to
the COAXIAL DIGITAL IN jack on the receiver.
Connecting to your home network
Connecting using a wireless network
To connect to the Internet with a wireless
network:
1 Set up your access point or wireless router (if not
already set up).
2 Press or to select Settings, then press
ENTER. The Settings menu opens.
Note
High definition video (up to 1080i) is supported with
a component video cable.
Note
The A/V cable can only send standard-definition
video (480i) to your TV.
Audio cable
Back of player
Component video cables
TV
Ye ll ow= Vi deo
White=Left audio
Red=Right audio
TV
Back of player
Note
This player can be connected to your wired network
using the Ethernet port on the back of your player or
by using a wireless network.
Analog audio receiver
Audio cable
Back of player
Connect to the OPTICAL
DIGITAL OUT jack
Back of player
Home theater system
Connect to the COAXIAL DIGITAL OUT jack
Wireless router
Player
NS-WBRDVD2-WBRDVD2-CA_10-0865_MAN_V5.book Page 5 Monday, October 24, 2011 10:28 PM