Insignia NS-WBRDVD2 - Video Output Configuration; Automatic HDMI Resolution Setup; Manual Video Resolution Selection; TV Aspect Ratio Adjustment

13
Wireless Blu-ray Disc Player
www.insigniaproducts.com
Automatically determining the best HDMI resolution
To automatically determine the best HDMI
resolution:
1 Press or to select Settings, then press
ENTER. The Settings menu opens.
2 Press or to select Display. The Display
Preview menu opens. Your player displays the
best HDMI format for the connected TV.
3 Press to go to the previous menu.
Selecting the video output resolution
To select the video output resolution:
1 Press or to select Settings, then press
ENTER. The Settings menu opens.
2 Press or to select Display, then press
ENTER. The Display menu opens.
3 Press or to select Resolution, then press
ENTER.
4 Press or to select the resolution you want,
then press ENTER.
5 Press to go to the previous menu.
Selecting the TV aspect ratio
1 Press or to select Settings, then press
ENTER. The Settings menu opens.
2 Press or to select Display, then press
ENTER. The Display menu opens.
3 Press or to select TV Aspect, then press
ENTER.
TV type Resolution
If your TV is a high-definition TV (HDTV) connected to
the HDMI jack on your player and you want your
player to set the output resolution based on
information exchanged between the TV and your
player over the HDMI cable
HDMI Auto
If the TV is a high-definition TV (HDTV) capable of
1080p (any frame rate) connected to the HDMI jack
on your player
1080p
If your TV is a high-definition TV (HDTV) capable of
1080i only
1080i
If your TV is a high-definition TV (HDTV) capable of
720p only
720p
If your TV is an enhanced-definition
TV (EDTV)
480p
If your TV is a standard-definition NTSC TV (American
or Asian SD TV)
480i
Notes
• Selecting a resolution the TV does not support
could result in an unstable picture or loss of the
picture. See the documentation that came with
the TV to find the resolutions the TV supports.
• Only the HDMI output on your player supports
1080p video output at any frame rate. If the TV
is connected to the component output, the
video output is limited to 1080i or lower.
NS-WBRDVD2-WBRDVD2-CA_10-0865_MAN_V5.book Page 13 Monday, October 24, 2011 10:28 PM