19
Insignia NS-LTDVD19-09 19” LCD TV/DVD Combo
www.insignia-products.com
3 Enter the password with the number buttons
on the remote control (the default password
is 0000). The
LOCK
menu opens.
4 Press / to select one of the following
settings, then press / to change the
setting. You can select:
• Change Password-For more information,
see “Changing the password” on page 19.
• System Lock-On or Off. (Input Block,
US, Canada, RRT setting, and Reset
RRT are only available when System
Lock is set to On.)
• Input Block-To block the input source.
• US (United States)-For more information,
see “Setting the parental control level - US
TV ratings” on page 20.
• Canada-For more information, see
“Setting the parental control level -
Canadian ratings” on page 22.
• RRT Setting-For more information, see
“Setting the parental control level - RRT
ratings” on page 23.
• Reset RRT-Select YES, then press
ENTER to reset the RRT to the default
settings.
5 Press TV MENU one or more times to close
the menu.
Changing the password
To change the password:
1 Press TV MENU on the remote control, then
press / to highlight the LOCK icon. The
Enter Password
screen opens.
2 Press to enter the
Enter Password
screen.
3 Enter the password with the number buttons
on the remote control (the default password
is 0000). The
LOCK
menu opens.
4 Press / to highlight Change Password,
then press to open the
Change Password
sub-menu.
5 Press the number buttons to input the old
password (if you have not set a password,
enter 0000). The cursor moves to the Enter
New Password column.
6 Press the number buttons on the remote
control to input the new password. The cursor
moves to the Confirm Password column.
7 Press number buttons to input the new
password again.
Blocking an input source
To block an input source:
1 Press TV MENU on the remote control, then
press / to highlight the LOCK icon. The
Enter Password
screen opens.
2 Press to enter the
Enter Password
screen.
To Next Page
Loading...
