BASIC FUNCTIONS (HEATING)
Off
Your heating will be switched off.
Auto
Your Thermostat will follow its Heating Schedule
The default is: (This can be adjusted via your online account)
15 Degrees between 00:00 and 06:00
20 Degrees between 06:00 and 08.30
17 Degrees between 08:30 and 17:00
22 Degrees between 17:00 and 22:30
15 Degrees between 22:30 and 00:00
Man
Your heating will be switched on and keep your property at the set temperature.
Boost
This is used if you would like to switch your heating on for a set period of time.
The default is 1 hour at 20 degrees. When pressed, ‘BOOST CH’ will flash to indicate
that boost is currently active.
Your heating will switch on for the programmed length of time, at the
programmed Boost Temperature (if set). After this time has expired, the
Thermostat will return to the previous function.
Adjusting the Temperature (not applicable when in Off)
Use the ‘/\’ and ‘\/’ buttons to set the desired room temperature.
Pressing the ‘CH MODE’ key will cycle through the above modes
Program Advance
This is used if you would like to ‘jump’ to the next profile temperature. Press the
‘ADV CH’ key to ‘jump’ to the next Temperature in your schedule. It will only have
an effect if the Thermostat is in auto mode. Pressing the ‘ADV CH’ key a 2nd time
will cancel the program advance and the unit will revert back to the current
profile set temperature.
14
To Next Page
Loading...
