WHAT'S IN THE BOX
TOOLS REQUIRED
WARNING Electricity is dangerous.
Before commencing work, ensure that you
read and understand these instructions and isolate the relevant circuit.
This
product should only be installed by a qualified electrician or heating engineer
and should be installed in accordance to
BS 7671 (IEE Wiring Regulations)
, or to
another equivalent standard.
2
Drill + 5mm
Drill Bit
Phillips
Screwdriver
Long
Nose Pliers
Flat Blade
Screwdriver
Boiler
Manual
Multimeter
Smart
Device
Wire
Cutters
1 x Ignite Wireless
Thermostat
1 x Ignite Wireless
Receiver
1 x Screw Pack
& Cable Clamp
2 x AA
Batteries
To Next Page
Loading...
