Inspired Flight IF1200 - User Manual

IF1200 Hexacopter
User Manual
Updated 3/30/21

Summary

1. Product Profile

1.1. Aircraft Overview

Overview of the IF1200's subassemblies and components.

1.2. Controller Overview

Detailed explanation of the Jeti DS-12 and Herelink controller layouts.

2. Charging the Batteries

2.1. Tattu TA1200 Battery Charger

Instructions for using the Tattu TA1200 charger for batteries.

Battery Charging Instructions

Step-by-step guide for charging the drone's batteries.

3. Setup Instructions

3.1. Set-Up Aircraft

Guide for assembling the IF1200 aircraft, including landing gear.

3.2. Installing Batteries

Step-by-step instructions for securely installing batteries on the aircraft.

3.3. Setting Up Ground Station

Hardware and software setup for various ground station configurations.

3.4. Camera Setup

Configuration for FPV and payload cameras, including balancing.

3.5. Powering On and Initial Operations

Procedures for powering on, flight modes, QGC, calibration, and flight operations.

3.6. Planning Autonomous Missions

Guide to creating and uploading autonomous flight paths.

4. Appendix

4.1. Installing QGroundControl

Instructions for installing the QGroundControl software.

4.2. Registering Vehicle with FAA

Information on legally registering the drone with the FAA.

4.3. System Failure and Upgrades

Handling system failures and upgrading aircraft firmware.

Inspired Flight IF1200 Specifications

General

Brand	Inspired Flight
Model	IF1200
Category	Toy
Language	English