IF1200A Pilot Operating Handbook 9. Battery Charging
Charge the Flight Batteries
IMPORTANT! Read the accompanying charger manual thoroughly before
connecting power and batteries to the charger. It contains important safety
information.
Balancing cells: The flight batteries used in the IF1200A contain multiple cells.
Differences in the voltages between cells can degrade the performance of the
batteries, and shorten its life. The Tattu battery charger has a function for
balancing the voltages of the cells. Read the included manual to implement this
function.
Connect the included AC power cable into the AC input connector on the charger.
Connect the other end of the AC power cable to a power source (100V–240 VAC).
Press the power button on the side of the battery charger (see below) to power on
the unit. The internal fans begin spinning, and the LCD displays on top of the charger
illuminate.
IFT Doc Num 102094, Rev 1.02 Page 12
To Next Page
Loading...
