Inspired Flight IF1200A - Assemble the Aircraft

IF1200A Pilot Operating Handbook 10. Assemble the Aircraft
10. Assemble the Aircraft
This section describes how to assemble the mechanical components of the IF1200A aircraft.
Step
Action
1
Locate the landing gear parts in the shipping container. There are two landing gear,
each consisting of a horizontal tube, and a vertical tube (see figure below).
2
Loosen the clamp on one of the horizontal tubes (with the rubber feet). See Figure 10
on next page.
Continued next page
Figure 9. Landing Gear Parts
IFT Doc Num 102094, Rev 1.02 Page 17