Insta360 Flow - How to Use; Buttons and Functions

4
How to Use
Buttons and Functions
Power Button
When Flow is powered off:
• Long press: Power on (won't work if Flow is folded).
• Press once: Check battery level OR if a mobile device is connected to Flow via
Type-C cable it will start charging.
When Flow is powered on:
• Long press: Power off.
• Press once: Check battery level.
• Press twice: Enter standby mode (to exit, press one of: power button, switch
button, shutter button, or trigger button)
With app open on the preview page:
• Press once: Return to the shooting page.
Switch Button
• Press twice: Switch the phone's orientation between horizontal and vertical.
With app open on the shooting page:
• Press once: Switch between the front and rear camera.
• Press three times: Switch between video and photo mode.
• Long-press: Return to preview page.
With app open on the preview page:
• Press once: Return to the previous file.
Shutter Button
With app open on the shooting page:
• Press once: Start taking photo or video recording.
• Long press: Start shooting in Burst mode.
With app open on the preview page:
• Press once: Switch to the next file.
Joystick
• Push to the left and right to change the pan axis direction. Push up and down
to change the tilt axis direction.