10
| Getting Started
2
Check Sealing Ring & Sealing Ring Rack
Remove: Pull sealing ring out from behind sealing ring rack.
Inspect sealing ring rack. It should be centered in the lid and an even
height all the way around.
Sealing ring must be installed before use and cleaned after each use.
Install: Place sealing ring over sealing ring rack and press into place.
Ensure entire sealing ring is snug behind sealing ring rack.
After closing the lid, the sealing ring creates an airtight seal between lid
and cooker base. The sealing ring is an integral part of product safety.
Note: An extra sealing ring is included with your cooker. Use one for sweet dishes and one for savory.
Only one sealing ring should be installed when using your cooker.Replace your sealing ring every
12-18 months or when deformation or damage is noticed.
CAUTION
Always check for cuts or deformations in sealing ring prior to cooking. Only use authorized
Instant Pot
®
sealing rings. Failure to follow these instructions may cause food to discharge,
which may lead to personal injury or property damage.
Remove
Install
CAUTION
Sealing rings may stretch over time. Do not use a stretched or damaged sealing ring. If
puckering occurs, replace sealing ring.
To Next Page
Loading...
Need help?
General
