16
User Manual
Install the Sealing Ring
1. Place the sealing ring behind the sealing ring rack and press it into
place. Press down firmly to ensure there is no puckering.
2. The sealing ring should be snug and should not fall out when the lid
is turned over.
Remove the Sealing Ring
1. Grip the edge of the sealing ring and pull it out from behind the
sealing ring rack.
2. Inspect the rack to ensure it is secured, centered, and an even
height all the way around the lid. If the sealing ring rack is
deformed, do not try to repair it.
Failure to adhere to safety instructions may result in personal
injury and/or property damage and may void your warranty.
To Next Page
Loading...
