Instant Pot Pro User Manual

20
User Manual
Test run
Setting up your new Instant Pot Pro for a test run is a great way to
familiarize yourself with how the unit works before you actually cook
a meal.
To perform a test run:
1. Add 3 cups water to the inner cooking pot.
2. Place the inner cooking pot into the cooker base.
3. Place the lid on top of the cooker base and lock the lid.
See ‘How to close and lock the lid’ below
4. Press Pressure Cook on the Control Panel.
5. Press the Control Dial, then turn the Control Dial to set the cooking
time to 5 minutes.
6. Press Keep Warm to turn off the Keep Warm setting.
7. Press Start to begin. The message display shows Preheating.
8. When cooking is done, the display shows End.
9. Release steam by moving the steam release to the Vent position.
See ‘How to release steam’ on page 22 for complete instructions
10. Unlock and open the lid after all steam has been completely
released.
See ‘How to unlock and open the lid’ below
11. Discard any remaining water, and then wash and dry the inner
cooking pot.
Now you’re ready to cook a meal in your Instant Pot Pro!

Instant Pot Pro Specifications

General

Model	Pro
Material	Stainless Steel
Control Type	Digital
Display	LCD
Pressure Levels	High, Low
Voltage	120V
Functions	Pressure Cook, Slow Cook, Sauté, Steam, Warm, Yogurt Maker, Sterilizer
Capacity	6 Quart
Power	1000 watts
Safety Features	Overheat Protection, Automatic Pressure Control, Safety Lid Lock
Dishwasher Safe Parts	Inner Pot, Lid
Warranty	1 year
Preset Programs	28 customizable programs