40
User Manual
Cook
1. Place the inner cooking pot into the cooker base.
2. Add 2 cups of water to the inner cooking pot.
3. Place the steam rack inside the inner cooking pot and then place
the baking dish on top of the steam rack.
4. Place the lid on top of the cooker base and lock the lid.
5. Choose Bake on the Control Panel. The ‘Custom’ smart program
flashes. To select it, press the Control Dial. Or to change it, turn the
Control Dial to select Cheesecake or Bread, then press the dial to
select it.
6. If you chose the ‘Custom’ smart program the pressure setting
flashes. Turn the Control Dial to choose None, Low or High, then
press the dial to select it.
7. If you chose the ‘Custom’ smart program and ‘None’ for the
pressure setting, the default cooking temperature flashes. To select
it, press the Control Dial. Or to change it, turn the Control Dial to
select a temperature, then press the dial to select it.
8. The default cooking time flashes. To select it, press the Control
Dial. Or to change it, turn the Control Dial to change it.
9. The vent reminder flashes. To keep it on, press the Control Dial. Or
to change it, turn the Control Dial to turn it off, then press the dial
to select it.
10. Press Start. The Progress Bar shows Preheating and the Instant
Pot Pro starts heating.
11. When it’s ready, the Progress Bar shows Cooking and the timer
starts counting down.
12. Keep Warm setting is Off by default. Press Keep Warm at any time
to turn it on.
13. When cooking completes, the display shows End. If Keep Warm
is turned on, the timer begins counting from 00:00 up to 10
hours (10:00).
To Next Page
Loading...
Need help?
General
