12
Adjustable 10-speed pulse motion blending for quick food processing.
Fixed-Pattern Pulse Program
1. Connect power cord to a 120V power source.
2. Add recipe ingredients to pitcher. For cold ingredients, refer to “Stacking Food
Ingredients” section in this manual.
3. Place lid on pitcher and turn lid clockwise until it clicks into place. Lid braces must fit
over glass lid brace catches, located on pitcher.
4. Place pitcher on blender base.
5. Touch Pulse.
6. Use + / – to adjust speed.
7. Touch Start. Blades will pulse as timer counts down.
8. Touch Cancel once desired consistency is reached, or wait until program completes.
9. When program has completed, blender will beep 10 times and display will show “End”.
10. Remove lid and serve.
Manual Pulse control.
1. Follow steps 1-4 in “Pulse Blending” section above.
2. Touch and hold Pulse for 5 seconds to switch to manual pulse control. Display will count
up from “00:00” and blades will turn as long as you are touching Pulse.
3. Remove your finger from Pulse to stop blending. Display will indicate
-P- between pulses.
4. If desired, use + / – to adjust pulse motion speed.
5. Touch to Pulse as needed.
To Next Page
Loading...
Need help?
General
