Instant Ace Plus User Manual

6
1
Read Manual & Place Blender
Do not remove safety stickers from blender base, pitcher, or lid.
Do not remove rating label from bottom of blender base.
Place blender base on a stable surface.
CAUTION
Do not place appliance on or in close proximity to a hot
gas or electric burner, or a heated oven; heat from an
external source will damage appliance.
2
Secure Power Cord
Connect to a 120V power source.
Display will remain blank until pitcher is in place on
blender base.
3
Fill Pitcher with Water
With the lid removed, fill with hot water to 32 oz / 1000 mL
as indicated on the pitcher.
4
Secure Lid
Place lid on pitcher and turn lid clockwise until it clicks
into place.
Lid braces must fit over glass lid brace catches, located
on pitcher.
5
Place Pitcher
Place the glass pitcher on blender base by aligning the
position indicator
near the bottom of the pitcher to the
position indicator
near the top of the base. Display will
indicate “OFF”.
Getting Started
Read
Manual
Before using your Instant Ace Plus, follow the steps below to clean the pitcher and lid.
32
40
48
32
24

Instant Ace Plus Specifications

General

Heating element	Yes
Voltage	120 V
Frequency	60 Hz
Capacity	56 oz
Material	Stainless steel
Speed settings	3
Power	1300 watts