Instant OMNI PLUS User Manual

14
Smart Program Settings
Function Description
Standby
When the oven is plugged in, the display turns on and shows OFF to
indicate that it is in Standby mode. You may select a Smart Program when
in Standby mode.
Start
The green Start key illuminates after a Smart Program is selected. Press
Start to begin cooking.
Pause
Open the oven door to pause the Smart Program once it has started.
When the door is open, the oven light will come on. Close the oven door
to resume the Smart Program.
Cancel
Press Cancel to stop a Smart Program at any time. The oven returns to
Standby mode and the display indicates OFF.
Convect
Once a Smart Program has begun, press Convect to toggle between HI
(High) and LO (Low) convection fan speeds. Refer to Smart Programs.
Rotate
Once a Smart Program has begun, press Rotate to turn the rotisserie
mode on or off.
Note: Not applicable to Toast or Bake.
Oven light on or off
Press the Presets dial to turn the cooking chamber light on or off. The light
will turn off after 1 minute of inactivity.
Adjust and Save
Smart Program Time
and/or Temperature
Smart Programs are designed with optimal time and temperature settings.
Once a Smart Program or Preset has been selected, the time and
temperature can be adjusted using the Time/Temp dial to suit your
individual preferences. The new adjusted time and/or temperature is
saved in memory once you press Start.
Change Temperature
Scale (°F or °C)
When in Standby mode, press and hold the Presets dial for 3 seconds to
change between Fahrenheit (˚F) and Celsius (˚C).
Note: Temperature scale adjustments must be made when in Standby
mode.
Turn Sound On or
Off
When the oven is in Standby mode, press and hold both dials (Presets and
Temp/Time) for 3 seconds to turn the sound on (S On) and off (SOFF).
Note: Error alerts cannot be silenced.
Reset Individual
Smart Programs
When the oven is in Standby mode, press and hold the desired Smart
Program button for 3 seconds. The appliance beeps when the Smart
Program has been restored to the factory default setting.
Reset All Smart
Programs
When the oven is in Standby mode, press and hold Cancel for 3 seconds.
The appliance will beep when all Smart Programs have been restored to
the factory default settings.

Instant OMNI PLUS Specifications

General

Power	1800 Watts
Control Type	Digital
Material	Stainless Steel
Voltage	120 V
Frequency	60 Hz
Timer	Up to 60 minutes
Capacity	18L
Functions	Air Fry, Bake, Roast, Broil, Dehydrate, Reheat, Toast, Convection
Temperature Range	150°F - 450°F
Included Accessories	Air Fry Basket, Baking Pan, Oven Rack