LCR-800 Series User Manual
72
4) Data
Result :
Display test results. When the test results data reaches to the
number of 10000 will be stored in a file automatically. If want
to store the data less than the number of 10000, must exit the
LCR-VIEWER first (the data can be stored automatically),
then execute again the LCR-VIEWER to start another
counting of test result data. Please refer to Figure 9-9 and 9-
10.
Figure 9-9
LCR-800 Series User Manual
73
Figure 9-10
To Next Page
Loading...
