insys icom EBW-E100 - Technical Data; Physical features; Technological Features

Technical Data
EBW-E100
18
5 Technical Data
5.1 Physical features
All specified data was measured with nominal input voltage, at full load, and an
ambient temperature of 25 ℃. The limit value tolerances are subject to the usual var-
iations.
Physical Feature
Value
Operating voltage
10 ... 48 V DC (±20%)
Power consumption idle
approx. 2 W
Power consumption connection
max. 3 W
Weight
130 g
Dimensions (Width x Depth x Height)
45 mm x 110 mm x 75 mm
Temperature range
-30 °C … 70 °C (max. 85 °C, s. below)
Maximum permissible humidity
95% non-condensing
IP rating
Housing IP40, Terminals IP20
Table 1: Physical Features
 Max. specification applies to occasional data transmission and use of
no more than 2 LAN ports. Functional limitations (in particular for data
transmission) may occur with this.
5.2 Technological Features
Technological Feature
Description
Ethernet interface
10/100 Mbit/s full/half duplex auto sense;
automatic detection of "crossover" or "patch"
wiring.
LAN ext interface
10/100 Mbit/s full/half duplex auto sense;
automatic detection of "crossover" or "patch"
wiring.
Table 2: Technological Features