4 5
Average power
consumption
0,534 mA (Bluetooth not connected)
1,7 mA (Bluetooth connected)
Input voltage 6~19V
Operating temperature -30 bis +80 °C (-22 bis +176 °F)
Dimensions 63*45*13mm (L*W*H)
Measurement accuracy ±0.03V
Short circuit protection Built-in
Reverse Polarity Protection Built-in
Bluetooth-Version 5.3
Bluetooth Name Battery Guard
App Name intAct Battery-Check
2.0 Safety instructions
The product housing and cables are made of fireproof materials and are suitable for high temperatures.
There is a built-in safety switch to prevent short-circuits, which automatically switches off the device
as soon as the current is too strong. Also, reverse polarity protection is built in, so in case of reverse
polarity, there will be no damage to the battery, vehicle or device.
1.0 Information about the product
3.0 Installation instruction
1. Attach the red connector to the positive
terminal and the black connector to the
negative terminal and tighten the screws.
2. Attach the device to the battery housing
with the supplied double-sided adhesive
tape. Clean the surface before taping..
Download the app before using the device.
To do so, scan the QR code on the product or
packaging or search for „intAct Battery Check” in
the App Store or Google Play Store..
4.1 Bluetooth radius
As long as there are no obstacles or other interference factors between the device and your
smartphone, the Bluetooth connection between the device and the app will remain within a radius of
up to 10 meters. If there are obstacles or other interfering factors within this radius, this may affect
the connection and reduce the connection radius.
10m 10m
4.0 App installation
To Next Page
Loading...