1-981-2180-GB, 2021-03-16 BCR-SD G2 Page: 19
SystemHouse Solutions
7 Attachments
7.1 Construction
The Card Reader is equipped with a built-in antenna for card reading, a clearly visible keypad, LED
indication, internal buzzer and convenient display for graphic symbols.
The Card Reader is sabotage protected in a sturdy case with RS485 interface.
The smart card reader use technology in the 13.56 MHz frequency range.
7.2 Functions
The Card Reader is used for contactless smart card access cards in a 50 mm range, status
indications of the door environment and access requests. Integrated management (Set, Unset and
Acknowledge) of alarm areas is also included.
Display guided operation. The display provides for certain functions such as alarm areas, menu-
based interface.
LED’s for indication of door status, etc.
Built in buzzer for warning and button press indication etc.
Integrated heater is activated at low ambient temperatures.
To Next Page
Loading...