Integra BCR-SD G2 - System Overview; Parts List; Technical Specifications

1-981-2180-GB, 2021-03-16 BCR-SD G2 Page: 4
 SystemHouse Solutions
1 System Overview
This manual provides instructions for installation, cabling, power supply evaluation for BCR-SD G2
and describe service procedures.
1.1 Parts List
Supplied:
I. BCR-SD G2 1 pcs
II. Connector 1 pcs
III. Wall tamper springs 2 pcs
IV. Box tamper springs 2 pcs
V. Quick Installation Guide 1 pcs
VI. Drilling pattern 1 pcs
VII. Opening Tool xCR-SD/S (Mini) G2
1 pcs
Not supplied
I. Instructions for other devices that will be connected to the BCR-SD G2.
1.2 Technical specifications
Power supply Typical/Min/Max 24V DC/20VDC/30VDC
Power consumption Typical/Max at 24V 35 mA/170 mA
Enclosure IP 54
Operating temperature -25
o
to +70
o
C
Dimensions NET (L/W/H) 123.5/88/20 mm
Weight NET 150 g
Color NCS 8500-N
NCS 6502-B
Communication RS485