Integra DHC-80.3 User Manual

20
En
Note
• When listening to an HDMI component through the AV controller, set the HDMI component so that its video can be seen on the TV
screen (on the TV, select the input of the HDMI component connected to the AV controller). If the TV power is off or the TV is set to
another input source, this may result in no sound from the AV controller or the sound may be cut off.
•As the “Audio TV Out” setting is set to “On” (➔ page 67) to hear from your TV speakers, the sound will also be output from the AV
controller’s speakers if you adjust the volume of the AV controller. Similarly, as the
“HDMI Control(RIHD)” setting is set to “On”
(➔ page 67) to hear from the speakers of an p-compatible TV, the AV controller’s speakers will produce sound if you adjust
the volume of the AV controller, while the TV speakers will be muted. To stop the AV controller’s speakers from producing sound,
you can either change the settings on the AV controller or on the TV, or turn down the volume of the AV controller.

Integra DHC-80.3 Specifications

General

Brand	Integra
Model	DHC-80.3
Category	Controller
Language	English